Adhesives & Lubricants
Showing all 22 results
-
Adhesives & Lubricants
Permabond 105 (for difficult surfaces) 1 x 20g bottle
Instant cyanoacrylate adhesive for hard to bond plastics and rubbers
- Ideal for bonding difficult rubbers such as EPDM and natural rubber.
- Low viscosity.
- Use on Polypropylene, Polyethylene or PTFE in combination with Permabond POP Primer.
SKU: WS-105-1X20G -
Adhesives & Lubricants
Permabond 2050 flexible cyanoacrylate adhesive 1 x 20g bottle
- Flexible, toughened cyanoacrylate.
- Clear coloured.
- Rapid cure at room temperature.
- Ideal for bonding dissimilar substrates where differential thermal expansion and contraction could be an issue.
- Ideal for bonding difficult materials such as Polypropylene, Polyethylene, PTFE and silicone when used in combination with POP Primer.
- Great for bonding “O” rings as you cannot feel the join due to flexibility of the 2050 adhesive.
SKU: WS-2050-1X20GR -
-
Adhesives & Lubricants
Permabond A1046 1 x 50ml bottle
Toughened / rapid-curing / high strength anaerobic retainer
- Toughened for extra impact and vibration resistance, ideal for bonding dissimilar metals.
- Rapid cure – ideal for inactive metals.
- DVGW approval.
- Suitable for fitting bearings, coaxial joints (such as gears to shafts, collars etc).
SKU: WS-A1046-1X50ML -
-
-
-
-
Adhesives & Lubricants
Permabond ET540 1 x 400ml dual cartridge
- Slow cure to allow accurate alignment of complex or larger components.
- High strength structural bond.
- Toughened – excellent impact and vibration resistance.
- Resistant to high temperatures (150 deg C peak).
- Mixing nozzles included.
- USE WITH 400ml 2:1 DISPENSING GUN
SKU: WS-ET540-1X400ML -
Adhesives & Lubricants
Permabond ET5428 BLACK 1 x 50ml Cartridge
- Toughened, excellent impact and vibration resistance.
- Ideal for bonding composite materials e.g. GRP, carbon fibre as well as metals, plastic, ceramics etc.
- Fairly rapid cure at room temperature.
- Mixing nozzles supplied.
SKU: Permabond ET5428 BLACK 1 x 50ml Cartridge -
-
Adhesives & Lubricants
Permabond ET5441 1 x 50ml dual cartridge
- High temperature resistance – maintains 30% strength at 200 degC!
- Long pot life.
- Excellent thermal conductivity 1.0-1.4 w/m.k
- Ideal for bonding heat sinks, batteries etc where thermal conductivity is required
- Mixing nozzles included.
- USE WITH 50ml 2:1 DISPENSING GUN or gun converter with a caulking gun
SKU: WS-ET5441-1X50ML -
Adhesives & Lubricants
Permabond POP Polyolefin Primer 1 x 50ml for use with cyanoacrylate
- For priming polyolefins (such as polypropylene, polyethylene, PTFE etc).
- Cost-effective, can be used instead of flame, corona and plasma treatment.
- Better workplace health and safety materials handling than acid-etching.
- Also suitable for priming silicone rubber for bonding with cyanoacrylate adhesive.
- Use with all cyanoacrylate adhesives.
- NB: not recommended for use with other types of adhesive (e.g. epoxy)
SKU: WS-POPPRIMER-1X50ML -
Adhesives & Lubricants
Permabond TA4246 1 x 65ml + initiator 46 35ml Kit
- High strength structural acrylic.
- Good impact and vibration resistance.
- Bonds glass, metals, ceramics, composites, wood, most plastics
- Resin and separate initiator (no need for dispensing gun or mixing nozzles).
- Rapid cure at room temperature.
SKU: WS-TA4246-I46K-X65ML -
Adhesives & Lubricants
Permabond TA437 2 x 65ml resin + 1 x 20ml initiator 41M
- Temperature resistance to 200 deg C.
- Non-flammable.
- 5-10 minute handling time without initiator; 20-30 sec cure with initiator 41M
- No need for dispensing gun or mixing nozzles.
- Ideal for bonding ferrites for electric motors.
- Reduced hazard SDS for Initiator 41M
SKU: WS-TA437-I41MK-2X65ML -
Adhesives & Lubricants
Permabond TA4610 1 x 50ml cartridge + mixing nozzle
- Bonds untreated polypropylene and polyethylene
- No need for primer
- Does not contain solvent
- Easy to apply, fast cure at room temperature.
- Suitable for bonding a wide range of substrates including plastics, ceramics, metal and composite materials.
SKU: WS-TA4610-1X50ML -
